GEPRC CineRun HD3 3 Inch 3-4S CineWhoop FPV Racing Drone BNF DJI FPV Air Unit F7 FC 35A ESC 1404 3850KV Motor – BNF-DJI


- +


GEPRC CineRun HD3 3 Inch CineWhoop FPV Racing Drone BNF DJI FPV Air Unit F7 FC 35A ESC 1404 3850KV Motor


CineRun HD3 is awesome style of drone with the latest DJI Digital Air Unit high-definition FPV System, achieve capture pretty amazing cinematic footage in the 3-inch mini Quad, “ CINERUN HD3 “ is mainly used for capture crisp HD footage that CINEWHOOP flight , it’s extremely light weight design  in 40% compared with “General” 5inch quad with for Gopro mounted. The whole weight only 203G, during the flight is enormous agile.

“ CineRun HD3 “ used STABLE PRO F7 35A flying tower, dual gyroscope ICM20689 works at the same time (most of the gyroscopes currently work in a single job), the feel is smooth and smooth. The stable flight eliminates the video jelly effect caused by vibrations, allowing pilots to take smoothly footage.

The redesigned frame can ensure stability, the propeller will not show in view during the flight, and the video can be completely for editing. It is also equipped with a durable and tough propeller guard, which can pass through the crowd and shoot some thrilling actions This allows the pilot more precision and control while filming

Match with sufficient power 1404 3850KV motor with 3-Bladed props, very handy for doing any motion.

“CineRun HD3 “ this is the best ready-made “ Cinewhoop “ re-engineered by professional assembled and tuned by GEPRC team. You must have it.


  • Full 3K Carbon Fiber
  • Side plate : 1.5mm
  • Top plate : 2mm
  • Bottom plate : 3mm
  • Side plate : 2mm
  • Wheelbase : 155mm
  • Motors: GR1404 3850KV
  • Recommended Battery: 4S 850mAh (No inclued)
  • Recommended Camera: for GoPro Hero 7/8(No inclued)


  • Operating Frequency: 5.725-5.850 GHz
  • Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
  • Min. Latency (end-to-end)
  • Low Latency Mode (720p/120fps): <28 ms
  • High-Quality Mode (720p/60fps): <40 ms
  • Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
  • Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
  • I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
  • Operating Temperature Range: 32° to 104°F (0° to 40°C)
  • Input Power: 7.4-17.6 V, about 4-9 W
  • Sensor: 1/3.2” CMOS; Effective Pixels: 4 M
  • Lens: 2.1 mm, f/2.1
  • Shutter: Rolling shutter
  • ISO: 100-25600
  • FOV: 150°(D); 122°(H); 93°(V)
  • Dimension: 22.1 × 21.1 × 20.1 mm
STABLE PRO F7 Flight Controller
  • Model:STABLE PRO F7 35A
  • MCU: STM32F722RET6
  • IMU: 2x ICM20689(SPI)
  • BlackBox: 32Mb onboard Flash
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Baro:NO
  • BEC Output: [email protected]
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • Firmware target: EXF722DUAL
  • Size: 26x26mm board, 20mm mounting holes (M2)
STABLE PRO F7 ESC BL32 2-6S 4in1
  • MCU:STM32F051
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm,M2
  • Supports Dshot1200,Proshot,Oneshot,Multishot
  • Current meter: Yes
  • Target: GEPRC-BL32-4IN1


Flight Controller Firmware EXF722DUAL:



  • No Propellers  in the view.
  • Perfect for DJI FPV HD(720p 120fps FPV)
  • Equipped with a 3-inch guard frame, Ensure safety and reliability
  • Full 3K Carbon Fiber
  • System:STABLE PRO F7 35A
  • Black Box: 32Mb onboard flash memory.
  • Full Soft Mounted FC System: Provides a clean operating environment for gyro.
  • Exquisite Assembly Process: Eliminate any potential installation problems.
  • Weight:203g(without battery and for GoPro Mounts TPU)


  • 1 x CineRun HD3 FPV Racing Drone
  • 1 x Mounts TPU for GoPro 7
  • 4 x 3inch Props(pairs)

Note: The camera of Gopro 7 is not included.


Shopping Cart Items

Empty cart

No products in the cart.

Return to Shop
Search for: